Yearly graphing will show the daily average consumption for each month of the
year. Financial year graphing is also available for selection.
Yearly Graphing (multiple periods)
eco-tracker allows you to compare multiple dates. This is very useful to see
the trend of your organisation. This example shows the yearly comparison.
Monthly graphing will show the daily average consumption for each day of the
month. This is very useful to check if your site is programmed to consider
weekends or public holidays.
Monthly graphing will show the daily total consumption for each day of the
Day * 7 Graphing
Day* 7 graphing will show the hourly consumption for seven consecutive days.
With this graph you will be able to see if equipment like air conditioners are
programmed to switch on and off at the correct times. You will also be able to
monitor the benefits of improvements or changes the following day.
Day graphing will show the hourly consumption for a specific day. Knowing your
daily consumption the next day will help you to identify problems with settings
of specific equipment and will allow you to take immediate action.
Day Graphing (multiple meters)
eco-tracker allows you to compare multiple meters. This is very useful to
monitor various sections or sites and see how they compare to each other. This
example shows the daily comparison.
Day + Temperature Graphing
Day + Temperature graphing will show the hourly consumption for a day and also
plot the hourly temperature graph for this day. This is very useful to check
why consumption may have been higher on some days than others.
Temperature data is retrieved from the Bureau of Meteorology.
In eco-tracker you can set up and maintain meters yourself. You can set up
anything you wish to monitor at your site including waste.
Let us know if a selection you wish to add is not in the list and we will set it
up for you. Contact Us.
If a meter is to be used for automated upload or requires a meter factor we
will need to make some backend adjustments.
Enter Daily Readings*
eco-tracker allows you to manually enter meter readings. The system will
calculate the consumption based on the reading entered and the meter factor
applied to the meter. This can be useful if data cannot be uploaded or for
* Site Administrator access only